Series 651mHIK
Good to know Data & facts
Connection size
DN 15 to DN 40 1/2" to 1 1/2"Set pressure
2.5 bar, 3.0 bar, 3.5 barTemperature
-10 °C to 120 °CProduct design
angle-type
Material
Gunmetal
Nominal width
DN 15 to DN 40
1/2" to 1 1/2"
Medium
-
Hot water
Temperature in °C
-10 °C to 120 °C
Pressure in bar
2.5 bar, 3.0 bar, 3.5 bar
651mHIK mit gleichem Ein-und Austritt
Robustes Membran-Sicherheitsventil in Vollmetallausführung zur Absicherung von Heißwasser- und Heizungsanlagen. Die konkurrenzlose Ausführung ohne Kunststoffteile ermöglicht den Einsatz dieser Ventile auch bei hohen Umgebungstemperaturen.
connection types
- Internal pipe thread
- CHP units (combined heat and power plants)
- closed, thermostatically protected water heating systems with flow temperatures up to 120°C
Not approved in Germany.
In the event of failure of the thermostatic control and limiting devices, the safety valve must blow off the entire heating output of the boiler in the form of hot water and steam. Due to the all-metal design, these safety valves can also be used at high ambient or radiant temperatures.
Safety valves are permanently set and lead-sealed at the factory.
